3m accuglide 2 manual

3m accuglide 2 manual
LINK 1 ENTER SITE >>> Download PDF
LINK 2 ENTER SITE >>> Download PDF


File Name:3m accuglide 2 manual.pdf
Size: 2633 KB
Type: PDF, ePub, eBook
Category: Book
Uploaded: 18 May 2019, 21:30 PM
Rating: 4.6/5 from 704 votes.

Status: AVAILABLE


Last checked: 15 Minutes ago!

In order to read or download 3m accuglide 2 manual ebook, you need to create a FREE account.

Download Now!

eBook includes PDF, ePub and Kindle version



✔ Register a free 1 month Trial Account.
✔ Download as many books as you like (Personal use)
✔ Cancel the membership at any time if not satisfied.
✔ Join Over 80000 Happy Readers


3m accuglide 2 manual

Paul, MN 55144-1000 Litho in U.S.A 3M Center, Building 220-8W-01 St.If any problems occur when operating this equipment, and you desire a service call, or phone consultation, call, write or Fax the appropriate number listed below. Taping Head Contents.Intended Use.Important Safeguards.Specifications.3 - 4 Dimensional Drawing. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. Seat tape roll fully against back flange of drum. Adhere tape lead end to threading needle as shown.Applying Mechanism Spring To obtain access to the spring, remove the taping head cover (four mounting screws). You must have JavaScript enabled in your browser to utilize the functionality of this website. Current prices online are subject to change based on this factory increase. We are in the process of updating pricing as quickly as possible. Please confirm pricing with our techs as the current price may no longer be valid. Use single quotes (') for phrases. Great care and consideration has gone into designing our site so that your experience finding the right part is a simple one, along with having the flexibility to speak with a parts technician if needed. Our friendly knowledgeable staff is ready to assist should you have any questions, just chat, email, or call us we're ready to help. CLICK HERE for more information. This case sealer also provides a convenient product packing station and low-impact sealing to prevent box damage. While the 4 belt drives hold the carton squarely in place the tape is securely applied down the center seam and your operation keeps running smoothly. Features Consistent durable case taper and former that manually adjusts to handle multiple box sizes. Rugged construction with 16-gauge welded steel frame and powder coat paint finish. Side belt drive for narrow profile boxes.http://wiktormajak.com.pl/local/userfiles/3m-navy-manual.xml

    Tags:
  • 3m accuglide 2 tape head manual, 3m accuglide 2 manual, 3m accuglide 3 manual, 3m accuglide 2 manual download, 3m accuglide 2 manual free, 3m accuglide 2 manual instructions, 3m accuglide 2 manual online, 3m accuglide 2 manual user, 3m accuglide 2 manual review, 3m accuglide 2 manual system, 3m accuglide 2 manual diagram, 3m accuglide 2 tape head manual.

Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial. The taping head cuts the tape as it is being applied. After the box is securely sealed, it exits the case sealer. Taping heads usually function in pairs to tape two seams of a case, either in an upper and lower configuration to tape top and bottom or mounted left and right to seal cases lying on their sides. Product ID: 3M 700cf UPC: 00-051115-71048-3, 00051115710483 Stock ID: 70-0067-5078-3, 70006750783 Maximum Box Width: 19 Inch Minimum Box Height: 4.5 Inch Minimum Box Length: 6 Inch Minimum Box Width: 6 Inch Operation: Operator folds flaps Product Form: Each Tape Width: 2 Inch Tape Width (metric): 48 mm. These parts are expected to wear through normal use, and should be kept on hand to minimize production delays. Spare Parts 3M Industrial Adhesives and Tapes 3M Center, Building 220-5E-06 St. Paul, MN 55144-1000 Next Page 2: Important Safeguards Replacement Parts and Service Information. To Our Customers:To Our Customers:Upper and Lower Taping Heads. Type 10500. Table of Contents Page. Equipment Warranty. Page 5: Dimensional Drawing Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHERPage 7 Important SafeguardsPage 9 SpecificationsPage 10: Blade Oiler Pad Specifications (Continued)Page 12: Tape Drum Friction Brake Operation. Page 13: One-Way Tension Roller Operation (Continued)Figure 3-4. Place tape roll on tape drum to dispense tape withSeat tape roll. Page 15 MaintenancePage 16 Maintenance (Continued)Page 17: Replacement Parts and Service AdjustmentsPage 18 Adjustments (Continued)Page 20 Troubleshooting. Troubleshooting Guide. Problem Cause Correction. The tape leg on the front of the The tape is threaded incorrectly The. Page 21 Troubleshooting (Continued). Tape is tabbing on the trailing leg There is excess tension on the. Recommended Spare Parts.http://kerryparsonsfoundation.org/media/3m-overhead-projector-service-manual.xml

A set of spare parts that will periodically require replacement due to normal wear. Page 23 Replacement Parts Illustrations and Parts ListsPage 35 4 14. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. Even lightweight cartons are securely and carefully sealed. And now there are pluses. This bottom belt adjustable case sealer also has laced belts with traction grip for reliable feeding and easy replacement. This rugged, epoxy powder-painted case sealer is constructed with dual masts for taping head stability and an emergency stop centrally located for quick and easy access. Addition options for this unit include: Casters, conveyors, box hold down and compression rollers to push the top flaps together for a better tape seal. With quick, easy adjustments, you can seal a wide range of case heights and sizes. Place your order based on product description and specification. It features curvilinear design that exerts minimal pressure on the cases, promoting smooth, damage-free production.Over the years he's learned what it takes to satisfy a customer. Which, sometimes means going the extra mile - literally. In the early 1990's, on a hot summer day in Columbus, OH, Art, then an employee of a local packaging supply company, received a call from a customer who had run out of packaging peanuts and therefore, were unable to ship any orders. With stock located over 100 miles away, his customer was facing a shut down situation. Art recognized the impact this could have on his customer and went to work exploring any and all options. Stock could be delivered the next day, but that wasn't good enough. Art decide to purchase some product from a local competitor and strapped it onto the top of his car. He recalls driving about 25 mph on back roads to his customers location. Needless to say his customer was extremely happy and was shipping packages with almost no down-time.http://www.drupalitalia.org/node/66963

Art (on right) going the extra mile for his customer. Art has instilled these same values in everyone here at Pack-n-Tape and our everyday activities. You can rest assured our experts will work to understand your business’s priorities and processes to ensure you get the products you need, when you need them. With extra lead time and direct access to the latest and greatest in 3M products and pricing, we are poised to help you keep your business on the cutting edge. Understanding We have dedicated 3M Strategic Account Specialists on our team, ready to provide personalized solutions for even your toughest applications. Our Specialists receive specialized product training at 3M headquarters and work closely with 3M’s local product specialists. Our entire sales staff has access to online and field-based training as well as enhanced product information. These resources give us an understanding of 3M product solutions you won’t find anywhere else. Our onsite expert works to understand your business’s priorities and processes, so you get the solutions you need, when you need them. Confidence In order to partner with 3M as a Strategic Distributor, Pack-n-Tape has demonstrated our company’s strength and our commitment to providing ongoing support to our customers. We are dedicated to bringing you value for the long haul. When product is available, ground orders typically ship after a 3 business day warehouse processing time. Air orders typically ship same day if orders are entered by 11:00am Mountain Standard Time. If you are shipping to a new address, please allow 1 day extra for ship-to account setup. These are estimates and could change if special circumstances prevail. Shipping Errors Customer must notify us within 14 days of receiving product if there is a shipping error. Incorrect Address Be sure to pay close attention to your shipping address information on the checkout page. The customer is responsible for providing correct shipping address information.https://www.agence-immotech.com/images/3m-ac100mb-manual.pdf

If an order is shipped to an incorrect address provided by the customer, the customer takes full responsibility to retrieve the package or will be responsible for the full cost of the items shipped. Pricing All products on this site are sold for profit.Returns cannot be processed without an RMA number. When returning products, we strongly recommend the use of a carrier that can track packages. You also assume responsibility for insuring the returned item. A minimum restocking fee of 25 or more, depending on the item, manufacturer policies, and circumstances. Return shipping is at your expense. If any of the product has been used and not in resalable as new condition, we cannot issue you a refund. Made to order items are NOT returnable. Pack-n-Tape must be notified within 14 days of receiving material for return authorization. Only stock items are returnable depending on manufacturers policy. All products are sold with their respective manufacturer’s warranties. Please note that warranty periods and services vary by manufacturer and product. NOTE: If a customer ships product outside the USA all warranties are void and no returns are accepted regardless of circumstances. Shipping Errors Customer must notify us within 14 days of receiving product if there is a shipping error Defective Merchandise If a product is suspect of being defective, only a portion of the suspected product may be returned until the factory completes required testing to determine if the product is within specification. Pack-n-Tape will pay for the shipping charges but it is the responsibility of the client to package the product in a suitable fashion. If the product is found to be defective then arrangements will be made to return the product. After the product is checked in and inspected a credit will be issued to the card used to purchase it. Cancellation Policy Once a customer completes the checkout procedure and the order is processed it can't be cancelled.

At this point the customer must follow our return policy. If a customer refuses shipment of an order placed online, no returns will be accepted. If the customer changes their mind about an order they must go through the return policy. Incorrect Address Be sure to pay close attention to your shipping address information on the shopping cart page. Pricing All products on this site are sold for profit.We hope you enjoy shopping at Pack-n-Tape. Place your order based on product description and specification. This taping head is designed for sealing under-filled boxes. Specifically designed for consistent and quality sealing in high-speed taping applications or under-filled boxes, this taping head also offers low maintenance for improved productivity. Its low profile side plate, open tape path and easy-to-follow instructions allow for fast, easy threading. Made of stainless steel for durability yet lightweight for easy handling. The rugged stainless steel construction provides exceptional durability, and the taping head also has a friction brake drum to maintain proper tape tension and prevent overcoasting for smooth tape application. Bringing Better Ideas to the Surface through Science and Innovation In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.Over the years he's learned what it takes to satisfy a customer. Learn more. Import Fees Deposit shown above may change depending on your chosen shipping option and the items in your basket during checkout.Please choose a different delivery location.Place your order and we’ll email you when we have an estimated delivery date.Please review Amazon’s return policy, which usually offers free returns within 30 days of receipt.

Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Purchase is subject to separate terms and conditions. Learn more. Please try again.Learn more. Import Fees Deposit shown above may change depending on your chosen shipping option and the items in your basket during checkout.Terms apply.Create a free account Representative 21.9 APR (variable). Credit offered by NewDay Ltd, over 18s only, subject to status. Terms apply.Please try your search again later.You can edit your question or post anyway.In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading. Amazon calculates a product’s star ratings based on a machine learned model instead of a raw data average. The model takes into account factors including the age of a rating, whether the ratings are from verified purchasers, and factors that establish reviewer trustworthiness. Download Tape Application Monitor instructions and parts list.If technical assistance or replacement parts are needed, call or fax the appropriate number listed below. Included with each machine is an Instructions and Parts List manual. If you have a technical question that does not require an immediate response, you may Fax it to 651-736-7282. Replacement Parts and Additional Manuals Order parts by part number, part description and quantity required. Note: Outside the U.S., contact the local 3M subsidiary for parts ordering information. 3M Industrial Adhesives and Tapes 3M Center, Building 220-5E-06 St. If any problems occur when operating this equipment and you desire a service call or phone consultation, call, write or fax the appropriate number listed below. SERVICE, REPLACEMENT PARTS AND ADDITIONAL MANUALS AVAILABLE DIRECT FROM: Order parts by part number, part description and quantity required.

The Tape Application Monitoring Kit is a self-contained control apparatus that identifies a tape related malfunction in box sealing operations. In addition, the control system will turn on an indicator light that is located on the control panel and can also be programmed to stop the case sealer when a low tape condition occurs. If any part is defective within this warranty period, your exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part. 3M must receive written notice of any alleged defect within a reasonable time after it is discovered, but in no event shall 3M have any obligation under this warranty unless it receives such notice within five (5) business days after the expiration of the warranty period. To be entitled to repair or replacement as provided under this warranty, the part must be returned as directed by 3M to its factory or other authorized service station designated by 3M. If 3M is unable to repair or replace the part within a reasonable time after receipt thereof, 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part or equipment. 3M shall have no obligation to repair or replace those parts failing due to normal wear, inadequate or improper maintenance, inadequate cleaning, improper operating environment, improper utilities, operator error, operator misuse, alteration, lack of reasonable care, or due to any accidental cause. Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from this 3M equipment, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including breach of warranty, breach of contract, negligence, or strict liability.

The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized representatives of 3M and seller. Paul, Minnesota 55144-1000 2 Important Safeguards This safety alert symbol identifies important messages in this manual.He is not allowed to work on live electrical components. He is allowed to work on live electrical panels, connector blocks, control equipment, etc. Operator Skill Level Descriptions Skill 1 - Machine Operator This operator is trained to use the machine with the machine controls, to feed cases into the machine, make adjustments for different case sizes, to change the tape and to start, stop and restart production. Skill 3 - Specialist From the Manufacturer Skilled operator sent by the manufacturer or its agent to perform complex repairs or modifications, when agreed with the customer. Operator's Skill Levels Required to Perform the Main Operations on Machine Operation State of the Machine Operator's Skill Number of Operators 2 and 2a 2 Installation and set up of the machine. Running with safety protections disabled. Tape replacement. Stopped by pressing the STOP button. 1 1 Ordinary maintenance. Electric power disconnected. 2 1 Extraordinary maintenance (mechanical). Running with safety protections disabled. 3 1 Extraordinary maintenance (electrical). Additional information is required for 800rks and 800rf applications. Additional components are required for outboard tape supply roll applications. A conversion kit (optional) is available. The beacon light allows operators and maintenance personnel to observe fault conditions from a distance away from the case sealer. Note: The Electrical Control box is equipped with the connection for the Remote Warning Beacon Light, no additional wiring is required. Electrical Control Box Remote Warning Beacon Light A din rail is used in the electrical control box to mount the primary components.

Figure 1-2 Strain relief cord grips are used to pass both control and power into and out of the electrical control box. If damage is evident, file a damage claim immediately with the transportation company and also notify your 3M Representative. Read the installation instructions completely before beginning installation. For future reference, record the Tape Application Monitoring Kit serial number on the front cover of this instruction manual in the space provided for future reference. Machine Set-Up WARNING Control Box Assembly The control box is mounted directly to the case sealer using the control box mounting bracket.Note: Because holes do not already exist in the electrical box of the 800rks and 800rf you must first position the control box mounting bracket then carefully mark and drill clearance holes (.343” dia.) for the (2) M8 mounting fasteners. Refer to figure 2-8. Mounting holes must be drilled in the lower drive frame on all case sealer models except for the 700aks and 700rks models. Note: This kit contains components to monitor both an upper and lower taping head on a single case sealer. Figure 2-9 Lower Dancer Arm Mounting The taping head tape drum bracket angle must be determined to properly position the Lower Dancer Arm assembly. Refer to figures 2-9 and 2-10 to determine which example represents the current machine configuration. 1) Remove the lower taping head supply roll 2) Properly position the taping head inside the case sealer cavity. Figure2-10 3) Position the Lower Dancer Arm spring post in the appropriate location. Use proper personal protective equipment when drilling mounting holes 8) Remove the lower taping head from the case sealer and drill a 0.25 inch (6.5mm) hole at the marks made in step 7. Figure 2-13 Note: Carefully remove any burrs on the case sealer frame before fastening the dancer arm assembly.

9) Fasten the dancer arm assembly to the case sealer frame using (2) M6 screws, washers and the nut plate as illustrated in figure 2-14. 10) Reinstall taping head without the tape supply roll. 11) Verify that the dancer arm roller is in contact with the empty tape drum. Lower Dancer Arm Mounting 1) Remove the lower taping head supply roll Figure 2-14 2) Properly position the taping head inside the case sealer cavity. 3) Place and hold the lower king bracket against the bottom right hand machine frame, aligning the bracket holes with the threaded inserts in the machine frame (Figure 2-15) Note: Right hand is defined by viewing the machine from the entrance end. 4) Fasten the lower king bracket to the case sealer right hand lower drive frame using (4) M6 screws and washers Note: The lower king bracket is positioned over the Guide Link on the 700aks machines. If an interference is observed it may be necessary to move the Link from the top of the Guide arm (Fig. 2-15) to the bottom to remove the interference. Figure 2-15 11 Installation and Set-Up (Continued) 5) Position the Lower Dancer Arm spring post in the appropriate location. The factory spring post setting (Fig. 2-11) corresponds to the bracket angle shown in Figure 2-9. The spring post must be moved (Figure 2-12) as the bracket angle changes to keep the dancer arm roller in contact with the tape drum (Figure 2-10) IMPORTANT: The spring post must be in the appropriate location to determine the correct mounting location. Figure 2-16 6) Attach the lower dancer arm assembly to the Lower king bracket using (2) M6 screws, washers and the nut plate. 7) Reinstall taping head without the tape supply roll. 8) Verify that the dancer arm roller is in contact with the empty tape drum. Upper Dancer Arm Assembly The upper dancer arm assembly is mounted directly to the case sealer’s inner column cross-member using one of the three supplied brackets. 1) Fasten the upper dancer arm assembly to the appropriate bracket (See Fig.

2-16, 2-17, 2-18) using the M6 screws and washers. The upper dancer arm assembly is attached to the 120af models using the existing (2) M8 screws that secure the kicker arm support to the inner column assembly. (Refer to Figure 2-18) If the dancer arm roller does not align with the tape drum complete steps 5 and 6 Figure 2-18 (120af Applications) 12 Installation and Set-Up (Continued) 5) Remove the e-ring, roller, shaft, sensor and bracket to position on correct side as illustrated in figure 2-19. 6) Thread the sensor into bracket until the end of the sensor is approx. 1mm (.039”) from end of the roller. Check to insure all seven targets are sensed as the roller turns. Box Present Sensing Assembly The box present sensing assembly consists of two identical brackets. One is used to mount the sensor and the other is for mounting the reflector. They are also slotted to allow for additional adjustment of sensor and reflector along the bracket length. Turn electrical supply off and disconnect before performing any adjustments, maintenance or servicing 3) Connect the box present sensor into the box present control cable and turn power on. 1) Verify that the control box is properly mounted to the case sealer. 4) Attach the sensor and reflector to the brackets. This will reduce the chance of faults caused by contacting and possibly altering the sensor alignment. 2) Determine the appropriate mounting location for your application. The box present sensor can be mounted at various locations from a point ahead of the applying roller to the end of the cutoff bracket. For applications with top taping only the position should be chosen using the upper taping head cutoff bracket. The sensor must also be positioned to detect the lowest height box without being blocked by taping head movement. The beam should only be broken by the box as it passes through the machine. Do not remove the final position mark.

2) Identify and route the control cables to the appropriate locations defined by bracket mounting. The cables are marked to indicate the appropriate sensor connection (i.e. UD - Upper Dispensing sensor, US - Upper low tape Supply sensor, LD - Lower Dispensing sensor, LS Lower low tape Supply sensor) Note: It is very important that this area is clean and dry to insure proper adhesion to surface. Completing the Electrical Systems Connections Note: It is very important that this area is clean and dry to insure proper adhesion to surface. The remaining sensors must be connected. Each dancer arm assembly has (2) proximity sensors, a tape dispense and a low tape supply sensor. 4) Connect the appropriate control cable connectors to each proximity sensor. The standard configuration will not connect directly to these machines. Contact a 3M sales representative for additional information. ? Turn electrical supply off and disconnect before performing any adjustments, maintenance or servicing Figure 2-22 15 Installation and Set-Up (Continued) Adjusting the Low Tape Supply Sensor The dancer arm position is used to define the low tape condition. The arm rotates as tape is dispensed. The low tape sensor “turns on” when the arm rotation matches the low tape level setting. The sensor position is adjustable and is determined by your process requirements. There are two adjustment that will affect the proper operation of the low tape sensor.Note: The Tape Application Monitor can be used to signal a low tape condition by turning on the panel indicator and (optional) beacon light. The system can be set to stop the case sealer when either the upper or lower low tape supply sensors detect a low tape condition. (Refer the Theory of Operation and Adjustments sections of this manual for further information on this feature.

) Figure 2-23 The sensor should be positioned to allow the operator ample time to replace the tape roll before adversely affecting your production process when the system is set to indicate a low tape condition. Setting the PLC Application Parameters The PLC controller is equipped with a display used for changing and monitoring data. There are three modes of operation which include Device, Digital Trimmer and System Mode. The Device modes are used for changing timers and registers for the your specific application. The PLC also has a Locking feature that is factory set to “Loc” to prevent inadvertent changes to the initial program parameters. To adjust the sensor: 1) Check the distance between the sensor and target. The gap must be less than 0.079 inches (2 mm) and must not touch the target or interfere with the motion of the dancer arm. Note:: For application specific data register and timer values refer to the Theory of Operation section of this manual. For general information on setting the data memory registers and timers refer to “Access Window” section of the Keyence Visual KV Series Installation Manual. 2) If necessary, loosen the M8 sensor jam nuts and reposition the sensor. 3) Rotate and hold the dancer arm in a position that represents your low tape condition. This can be accomplished by placing a spacer or a tape roll with the amount of tape that represents the low tape condition. Slots are supplied to allow adjustment. If the operational configuration is not displayed on the PLC while in the Device mode refer to the trouble shooting section of this manual. Figure 2-26 17 Installation and Set-Up (Continued) Changing operational configuration: or key In the Device mode press either the until the number 75 is displayed in the upper right hand corner. (data memory register 75). Note: The screen will display “User 50” after changing the taping head configuration (value of register DM0075) to indicate a new configuration has been selected.

The Indicator light on the control box and the beacon light (optional) will flash. The system must be reset for the changes to take effect. They are set at the factory for standard sensor installation.Refer to the adjustment section for more information.For a more complete description refer to Operation and adjustment Sections of this manual.The PLC controller contains programs to interpret the information received from these sensors. This system has a setup menu for selecting the system configuration and operating parameters for the application. Operational Explanation The operation is based on information received from the sensors supplied with this system. They sense the presence of electrical current supplied to the case sealer, the presence of a box as it passes through the machine, the dispensing of tape from the supply roll and a low level of tape on the supply roll. The spring loaded dancer arm assembly is mounted adjacent to each taping head to be monitored. The dancer arm roller is placed in contact with the tape supply roll to monitor tape movement and supply level. Seven targets spaced equally around the circumference of the dancer arm roller, pass the tape dispensing sensor to indicate when tape is dispensed. The information obtained from the tape dispensing sensor is used to calculate the tape apply V1 (i.e. supply roll tape velocity while taped is being applied) and tape cut V2 (i.e. supply roll tape velocity after tape has been cut). The calculations occur at two different points with information obtained from the box presence sensor. The first calculation for V1 begins when the leading edge of the box reaches the tape cutoff bracket and ends when the trailing edge reaches the cutoff bracket. The calculation for V2 begins at a point after the trailing edge has passed the cutoff bracket and ends after the time expires ont TH053.

Designed & Built by ZuPP

 

Designed & Built by ZuPP

 

 

CONTACT

 

 

B.O. Sport

Bospoort 14, B- 3680 Maaseik

+32 89 56 32 24

 

info@bosport.be